Description
Fifty-foot extension cable for TV2 wired sensors. TV2 wired sensors come with a twenty-foot wire that is plugged into the TV2 monitor. If the sensor needs to be positioned more than twenty feet away from the monitor a TV2 wired sensor extension must be used. This is a fifty foot four conductor with a 2.5 mm plug on each end. One for the sensor and one for the monitor.
Because the TV2 sensors can easily communicate with the monitor up to 300 feet away several of the fifty foot extension cables can be plugged into each other. It is not a good idea to extend the distance beyond three hundred feet as some signal loss may occur which would be manifested by an inaccurate measurement.
The extension cables are available in fifty and one hundred foot lengths.
50-foot extension cable for
TV2 wired sensors
- Connector: 3.5mm (1/8″) Male to Male
- 4 conductor, connected straight through
- Outer Diameter of Cable: 3.00mm
- Outer Diameter of Molded Connector: 10.3mm
- 4 individually PVC protected 30AWG wires (Red, White, Green, Yellow)
- Connector end is nickel plated
